BP104 document number 81500 rev. 1.4, 20-nov-06 vishay semiconductors www.vishay.com 1 94 8 3 8 6 silicon pin photodiode description BP104 is a high speed and high sensitive pin photo- diode in a miniature flat plastic package. its top view construction makes it ideal as a low cost replacement of to-5 devices in many applications. the epoxy package itself is an ir filter, spectrally matched to gaas or gaas on gaalas ir emitters ( p = 950 nm). the large active area combined with a flat case gives a high sensitivity at a wide viewing angle. features ? large radiant sensitive area (a = 7.5 mm 2 ) ? wide angle of half sensitivity: ? = 65 ? high photo sensitivity ? fast response times ? small junction capacitance ? plastic case with ir filter: ( = 950 nm) ? lead (pb)-free component ? component in accordance to rohs 2002/95/ec and weee 2002/96/ec applications ? high speed photo detector absolute maximum ratings t amb = 25 c, unless otherwise specified electrical characteristics t amb = 25 c, unless otherwise specified e3 parameter test condition symbol value unit reverse voltage v r 60 v power dissipation t amb 25 c p v 215 mw junction temperature t j 100 c storage temperature range t stg - 55 to + 100 c soldering temperature t 3 s t sd 260 c thermal resistance junction / ambient r thja 350 k/w parameter test condition symbol min ty p. max unit breakdown voltage i r = 100 a, e = 0 v (br) 60 v reverse dark current v r = 10 v, e = 0 i ro 230na diode capacitance v r = 0 v, f = 1 mhz, e = 0 c d 70 pf v r = 3 v, f = 1 mhz, e = 0 c d 25 40 pf
www.vishay.com 2 document number 81500 rev. 1.4, 20-nov-06 BP104 vishay semiconductors optical characteristics t amb = 25 c, unless otherwise specified typical characteristics t amb = 25 c, unless otherwise specified parameter test condition symbol min ty p. max unit open circuit voltage e e = 1 mw/cm 2 , = 950 nm v o 350 mv short circuit current e e = 1 mw/cm 2 , = 950 nm i k 38 a reverse light current e e = 1 mw/cm 2 , = 950 nm, v r = 5 v i ra 40 45 a angle of half sensitivity ? 65 deg wavelength of peak sensitivity p 950 nm range of spectral bandwidth 0.5 870 to 1050 nm noise equivalent power v r = 10 v, = 950 nm nep 4 x 10 -14 w/ hz rise time v r = 10 v, r l = 1 k , = 820 nm t r 100 ns fall time v r = 10 v, r l = 1 k , = 820 nm t f 100 ns figure 1. reverse dark current vs. ambient temperature figure 2. relative reverse light current vs. ambient temperature 20 40 60 8 0 1 10 100 1000 100 94 8 403 v r = 10 v t am b - am b ient temperat u re (c) i ro - re v erse dark c u rrent (na) 0.6 0. 8 1.0 1.2 1.4 94 8 409 v r =5 v = 950 nm 100 8 0 60 40 20 0 i - relati v e re v erse light c u rrent t - am b ient temperat u re (c) am b ra rel figure 3. reverse light current vs. irradiance figure 4. reverse light current vs. reverse voltage 0.01 0.1 1 0.1 1 10 100 1000 i - re v erse light c u rrent (a) ra e e - irradiance (m w /cm2) 10 94 8 414 v r = 5 v = 950 nm 0.1 1 10 1 10 100 v r - re v erse v oltage ( v ) 100 94 8 415 i - re v erse light c u rrent (a) ra 1 m w /cm 2 0.5 m w /cm 2 0.2 m w /cm 2 0.1 m w /cm 2 0.05 m w /cm 2 0.02 m w /cm 2 = 950 nm
BP104 document number 81500 rev. 1.4, 20-nov-06 vishay semiconductors www.vishay.com 3 figure 5. diode capacitance vs. reverse voltage figure 6. relative spectral sensitivity vs. wavelength figure 7. relative radiant sensitivity vs. angular displacement 0 20 40 60 8 0 94 8 407 e=0 f = 1 mhz c d - diode capacitance (pf) v r - re v erse v oltage ( v ) 0.1 100 110 750 8 50 950 1050 0 0.2 0.4 0.6 0. 8 1 . 2 s ( ) - relati v e spectral sensiti v ity rel - w a v elength (nm) 1150 94 8 40 8 1.0 0.4 0.2 0 0.2 0.4 s - relati v e sensiti v ity rel 0.6 94 8 406 0.6 0.9 0. 8 0 30 10 20 40 50 60 70 8 0 0.7 1.0
www.vishay.com 4 document number 81500 rev. 1.4, 20-nov-06 BP104 vishay semiconductors package dimensions in mm 96 121 8 6
BP104 document number 81500 rev. 1.4, 20-nov-06 vishay semiconductors www.vishay.com 5 ozone depleting subst ances policy statement it is the policy of vishay semiconductor gmbh to 1. meet all present and future national and international statutory requirements. 2. regularly and continuously improve the performance of our products, processes, distribution and operating systems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. it is particular concern to control or eliminate releas es of those substances into the atmosphere which are known as ozone depleting substances (odss). the montreal protocol (1987) and its london amendments (1990) intend to severely restrict the use of odss and forbid their use within the next ten years. various national and international initiatives are pressing for an earlier ban on these substances. vishay semiconductor gmbh has been able to use its policy of continuous improvements to eliminate the use of odss listed in the following documents. 1. annex a, b and list of transitional substances of the montreal protocol and the london amendments respectively 2. class i and ii ozone depleting substances in the clean air act amendments of 1990 by the environmental protection agency (epa) in the usa 3. council decision 88/540/eec and 91/690/eec annex a, b and c (transitional substances) respectively. vishay semiconductor gmbh can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain such substances. we reserve the right to make changes to improve technical design and may do so without further notice. parameters can vary in different applications. all operating parameters must be validated for each customer application by the customer. should the buyer use vishay semiconductors products for any unintended or unauthorized application, the buyer shall indemnify vishay semiconductors against all claims, costs, damages, and expenses, arising out of , directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use. vishay semiconductor gmbh, p.o.b. 3535, d-74025 heilbronn, germany
document number: 91000 www.vishay.com revision: 18-jul-08 1 disclaimer legal disclaimer notice vishay all product specifications and data are subject to change without notice. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, ?vishay?), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. vishay disclaims any and all li ability arising out of the use or application of any product describ ed herein or of any information provided herein to the maximum extent permit ted by law. the product specifications do not expand or otherwise modify vishay?s terms and conditions of purcha se, including but not limited to the warranty expressed therein, which apply to these products. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of vishay. the products shown herein are not designed for use in medi cal, life-saving, or life-sustaining applications unless otherwise expressly indicated. customers using or selling vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify vishay for any damages arising or resulting from such use or sale. please contact authorized vishay personnel to obtain written terms and conditions regarding products designed for such applications. product names and markings noted herein may be trademarks of their respective owners.
|
